i all I have a CIsco 2811 and I m about to configure a sip trunk to my sip-providerwhen I try to register my sip trunk on Elastix-ip-pbx it is all ok with this config_________________________________________________________-"in peer details" : h...
Hi allI have a cisco 2811 router with pvdm2-32 and vwic2- 4FX0 and IOS version of Router is 15.01 when I use this router as a fxo gateway : in outgoing calls , the Co line is occupying but no connection to called number is happening , just some ...
Hi all I have a sip trunk and 4 fxo module on my cisco 2811 router.A and I want to configure a basic IVR on my router but I do not know in which format should I create my sound files and record them in Router (compact flash or USB cool-disk? )And how...
Hi Guys
I tried to config a sip trunk on cisco 2811c router and I believe it does not support some VoIP commands
like allow connections sip to sip in voice service voip
is it true that this 2811c does not support CME VoIP commands even with differ...
Hi all
I have run a scenario with cisco router 2811 and I need help to solve outgoing problem
2811 (CME)(172.192.16.58)
---->-----sip trunk---->----- SBC(172.123.101.163)
2811 is connected to SBC through interface Fast 0/1 : 172.192.16.58
2811 is co...
HiI have the same problem I tried to solve this issue by changing NAT in Cisco 7942G XML file , but it did not work any Idea what should we do ? thanks in advance
I talk to my ITSP ,
they do not accept any fault from their configuration and they say , if elastix works with their system then it's our configuration in cisco which should be fixed.
and also our ITSP does not support video calls and messaging .......
There is not any firewall between cisco 2811 and our provider
and here is elastix debug when extention 100 is calling 0990131375
easterisk > sip set debug
#####################################################################
VoIP*CLI> sip set d...
