Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We're configuring up a Cisco ISR4331. Cisco IOS XE Software, Version 16.09.05
Cisco IOS Software [Fuji], ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.9.5, RELEASE SOFTWARE (fc1)It connects to the internet via an ISP provided PPP conn...
Hi folks,
Have a situation where I'm seeing a lot of spamming of the logs with 2 particular errors:
Jul 24 17:57:57.290 PHT: %VOICE_IEC-3-GW: SIP: Internal Error (PRACK wait timeout): IEC=1.1.129.7.62.0 on callID 18043 GUID=D21758D48E5E11E8BFA4811988...
We don't know why it was resolved - but strongly believe it was hardware on the site (firewall or switch).The routers were relocated to a new office running on different equipment (different internet connection, firewall, and routing/switching infras...
Hi,I use this very handy Python script which someone has kindly shared on GitHub.https://gist.github.com/SmartFinn/be417c7a7e0b3d9bee9c29e74d08ff78 Works a treat (tried & tested) HTH
We had this exact issue & it was NAT. NAT was working, maybe a little too well.https://community.cisco.com/t5/routing/unable-to-ssh-to-wan-dialer-ip-of-isr4k-when-nat-is-enabled/m-p/4309510#M348617TL;DR:We had a 'permit ip any any' for our NAT outbou...
This did the trick! Many thanks. Rated & accepted as solution.NAT configuration is now as follows & remote access via Dialer1 IP is working (obviously security policy to restrict accesses in place):ip access-list extended ACL-NAT
remark DO NOT ADD "...
