Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am getting the error while taking ssh of the router 1941. And i can able to access all other cisco switches routers thru ssh. But only 1941 router, i am facing the issue in daily 4-5 time. after 5-6 hrs it automatically comes up.changed the cable....
I am getting the error while taking ssh of the router 1941. And i can able to access all other cisco switches routers thru ssh. But only 1941 router, i am facing the issue in daily 4-5 time. after 5-6 hrs it automatically comes up.changed the cable....
Hi,I am getting the error while taking ssh of the router 1941. And i can able to access all other cisco switches routers thru ssh. But only 1941 router, i am facing the issue in daily 4-5 time. after 5-6 hrs it automatically comes up. changed the cab...
: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet2/25 (not half duplex), with MAC 1 (half duplex)
: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet2/25 (not half duplex), with MAC t 1 (half duplex).: %CDP-4...
: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet2/25 (not half duplex), with MAC 1 (half duplex)
: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet2/25 (not half duplex), with MAC t 1 (half duplex).: %CDP-...
only SSH connection says "Network error : connection timed out .." The issue occurs at every day and after some time automatically SSH works fine. There is no specific time. It occurs randomly, no fixed time.T Steps,Reconfigured the SSH connection wi...
only SSH connection says "Network error : connection timed out .." The issue occurs at every day and after some time automatically SSH works fine. There is no specific time. It occurs randomly, no fixed time.T Steps,Reconfigured the SSH connection wi...
We trying configuring SNMPv3 on firepower thru FMC console. by Devices-platform settings-SNMP- choose SNMPv3 and created user with authentication protocol as MD5. In Privacy protocol, we have chosen none. then the result is SUCCESS.
Anyway, It is ...
No issues/Asic error with old image - 12.X.., after booting a new imag - 15.0 only we are getting the error. Any way we have to mitigate above said vulnerabilities. Pls guide
