Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys, I'm more of a network guy than a telecom guy (we do have 2 of those guys that take care of the voip side), but I'm hoping someone has seen this issue before.We are primarily a Cisco 3750, 3750G, 3750X shop in terms of switches but recently g...
I'm wondering if there are any ipsec tunnel experts who might be able to help me on a quirky setup. I have a site which surfs through another site. So Site A traffic comes to Site B through a private connection and then goes out from there (internet...
Hi there, first time posting I'm setting up a few 4500x pairs in VSS and have been testing the fast hello feature included in the 3.5 IOS but have run into issues when I tested. config for this portion: switch virtual domain 5dual-active detection ...
Hi, I should have been more clear. I was simply following the asdm image disk0:/<asdm-new-image.bin> command to try to upgrade the ASDM without rebooting or affecting traffic. It appears as though I have run into a bug in 9.8(3)14 (bug id CSCvn76102)...
For anyone trying this and believing that it will work: be careful. When I did the commands above the http now shows: The flash device is in use by another task.
The flash device is in use by another task.
HTTP/1.1 404 Not Found
Date: Wed, 02 Oct 20...
Hi guys, here is how you do this: 1) setup FTP server with anonymous login2) make sure you can ping your FTP server from SFR:asasfr-boot>ping 10.1.1.148PING 10.1.1.148 (10.1.1.148): 56 data bytes64 bytes from 10.1.1.148: seq=52 ttl=255 time=2007.810 ...
It was an immediate improvement in the speed in which ASDM opened, thanks Marvin. I think it was also contributing to bogging down my laptop while ASDM was on. I will give it a day or two to make sure.
Husycisco, I just got off the phone with TAC and we came up with a workaround for this. He eventually agreed that it's an enhancement needed at the very least to select the VTI as an ingress/egress interface for identity NAT. What we were able to do ...