About d.lachapelle

d.lachapelle · 03-04-2015

Hi guys, I'm more of a network guy than a telecom guy (we do have 2 of those guys that take care of the voip side), but I'm hoping someone has seen this issue before.We are primarily a Cisco 3750, 3750G, 3750X shop in terms of switches but recently g...

d.lachapelle · 02-10-2015

I'm wondering if there are any ipsec tunnel experts who might be able to help me on a quirky setup. I have a site which surfs through another site. So Site A traffic comes to Site B through a private connection and then goes out from there (internet...

d.lachapelle · 12-04-2014

Hi there, first time posting :) I'm setting up a few 4500x pairs in VSS and have been testing the fast hello feature included in the 3.5 IOS but have run into issues when I tested. config for this portion: switch virtual domain 5dual-active detection...

d.lachapelle · 10-02-2019

Hi, I should have been more clear. I was simply following the asdm image disk0:/<asdm-new-image.bin> command to try to upgrade the ASDM without rebooting or affecting traffic. It appears as though I have run into a bug in 9.8(3)14 (bug id CSCvn76102)...

d.lachapelle · 10-02-2019

For anyone trying this and believing that it will work: be careful. When I did the commands above the http now shows: The flash device is in use by another task. The flash device is in use by another task. HTTP/1.1 404 Not Found Date: Wed, 02 Oct 20...

d.lachapelle · 04-02-2019

Hi guys, here is how you do this: 1) setup FTP server with anonymous login2) make sure you can ping your FTP server from SFR:asasfr-boot>ping 10.1.1.148PING 10.1.1.148 (10.1.1.148): 56 data bytes64 bytes from 10.1.1.148: seq=52 ttl=255 time=2007.810 ...

d.lachapelle · 01-24-2018

It was an immediate improvement in the speed in which ASDM opened, thanks Marvin. I think it was also contributing to bogging down my laptop while ASDM was on. I will give it a day or two to make sure.

d.lachapelle · 09-05-2017

Husycisco, I just got off the phone with TAC and we came up with a workaround for this. He eventually agreed that it's an enhancement needed at the very least to select the VTI as an ingress/egress interface for identity NAT. What we were able to do ...

Member Since	‎12-04-2014 12:25 PM
Date Last Visited	‎04-23-2021 07:11 AM
Posts	23
Total Helpful Votes Received	20

User Statistics

User Activity

Mitel5324 voip phone takes 30 mins to boot on Cisco3850 switches

How to tell ipsec lan-to-lan tunnel to be "ip nat inside"

4500x Fast Hello not working as it should

Re: Hi Daniel,

Re: Hi Daniel,

Re: Sfr module upgrade aborted

Re: Try clearing your Java cache

Re: Hi Michal,