Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all, I've configured lac shaping for upload on my 2811 (ios xxx124-7.bin) as per:http://www.cisco.com/en/US/partner/products/ps6350/products_configuration_guide_chapter09186a0080455ade.htmlHowever it's not working. I suspect IOS fault, just wanted...
Hi all, I have an IPSec to MPLS solution running on our PE router. Currently IPSec is (Cisco VPN client over the internet) connected with a given VRF based on the group name used. This works, but isn't really ideal for me, it would be much more elega...
Hi all, I'm having some problems connecting VPN Client over the internet to our Cisco IOS router. Some help would be very much appreciated!!On the VPN client log I receive the following error messages:---------------------------...573 16:32:13.164...
Hi, I am trying to load balance accross two unequal cost paths with EIGRP. There is two links running from a central router to a site router. From the site router I can see that eigrp knows about the two paths to 0.0.0.0:siterouter_test#sh ip eigrp v...
Hi GNT (no name on your profile)... Thanks for the response, appreciated..Running IOS "c2800nm-spservicesk9-mz.124-7.bin", Software Advisor says it supports LAC policing....In addition to the configuration originally posted I created the following......
Hi Phillip, thanks for the reply. I've already tried what you've outlined. If you take a look at the information posted about you'll see the SSS sessions and the configured interface. Cheers, Jerome
And, from the VPN client machine, once logged in, I can indeed ping things in the global routing table. (As opposed to the VRF referred to in the AVPair). Any thoughts?
Hi Stig, thanks for the reponse, I'd prefer to stick with the Radius if possible. I've added those changes to a test radius account. I'm assuming the Loopback interface referred to is in "MYVRF"?So, the VPN client connects, but a "show ip route vrf M...
Actually Gautam, my mistake, your absolutely right! Fantastic!!So, the solution is:You CAN point vpn client at a loopback address, BUT, the interface which the vpn traffic passes through to get to the loopback must have the crypto map applied. So, I'...
