About jgaude

jgaude · 07-19-2005

Hello,I know this seems lame, but I can't find an answer. The situation is, in ficticious addrs:7206 fe0:77.26.32.26509 sc0:77.26.50.5Workstation:7.4.10.336The workstation cannot ping the router. There are no vlans setup on the switch. What needs to ...

jgaude · 08-30-2004

Hello,I'm trying to route Frame Relay in a test lab and have not been successful yet. I've got two 7206 routers, with IOS 12.0, and E1 serial cards. I've got the E1's cross connected with an RJ45 cable... link lights are good. I've setup each E1 as a...

jgaude · 08-30-2004

Hello,I've got two 7206 routers with E1 cards and I'm trying to setup routing between them locally. I've got the two routers connected with a cross-connect cable between Serial5/0 on each router. My config for each side is the same, interface Serial5...

jgaude · 08-31-2004

You are correct!!! That fixed the problem. I addr'd the 34.1 interface to 32.1 and did static routes to the far side Ethernet ports and all is well!I'm not sure why I could ping each interface. Maybe because I did a 0.0.0.0 0.0.0.0 192.168.32.0 route...

jgaude · 08-31-2004

You are correct!!! That fixed the problem. I addr'd the 34.1 interface to 32.1 and did static routes to the far side Ethernet ports and all is well!Thanks so much!!!...Joe

jgaude · 08-30-2004

Yes, that is correct. From the routers console, I can ping the other routers E1 interface but no further. From a PC, I can ping the Eth0 interface, then the E1 interface, then no further. So the routing is stopping at the E1 interface on each router....

jgaude · 08-30-2004

Hi,And thanks for taking a look at this. Here are the sh run and ip routes:sh runBuilding configuration...Current configuration:!version 12.0service timestamps debug uptimeservice timestamps log uptimeno service password-encryption!hostname c2c_rtr_e...

jgaude · 08-30-2004

Hi Georg,Nope, the clock rate and removal of the second frame-relay switching did not help... Should i have both router interfaces set to dlci 16? Or should they be different? Do I need to run rip? Or maybe specify a neighbor? I'm really lost as to w...

Member Since	‎08-30-2004 08:07 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	10

User Statistics

User Activity

7206/6509/Worstation Route brain fade....

Frame Relay Routing...

E1 Routing problem...

Re: E1 Routing problem...

Re: E1 Routing problem...

Re: E1 Routing problem...

Re: E1 Routing problem...

Re: Frame Relay Routing...