About C_Noble

C_Noble · 07-23-2024

I am preparing to enable FIPS mode on my Call Manager (1Pub 4Subs) which is running Version 14 SU4.For reference the cluster is in mixed-mode.I want to see if anyone has experience doing this. Normally I enable FIPS mode when I first build the clust...

C_Noble · 05-23-2024

I need some help determining the process and impact of changing my Call Manager names under System > Server.For reference my cluster is version 14. All nodes within the cluster were installed with a host name and the domain name is configured. Addi...

C_Noble · 12-13-2023

I need some help with modifying Called Party numbers.We have an MGCP gateway with T1 PRIs to a legacy PBX.The legacy PBX can only send me 7 digits instead of 10. I have 10 digits on the phone and I need to add 777 (Example Number for privacy) to the ...

C_Noble · 04-13-2023

I have a question in regards to CUCM and UCCX Compatibility.Current Software Versions:CUCM v11.5 SU10UCCX v11.5 SU1The UCCX 12.5 compatibility matrix shows that it is compatible with 11.5 SU4 and above. This means I can upgrade UCCX to 12.5 and s...

C_Noble · 12-13-2022

I am attempting to establish secure SIP connectivity and another organization. We both use different 3rd part certificate authorities. Is there a way in Cisco IOS / CUBE to load certificate trusts? I want to ensure that both SBCs trust the certific...

C_Noble · 05-23-2024

Thats a good point that the certificates are based upon the hostname vs the IP address under System Server. Thanks for the help.

C_Noble · 05-23-2024

For reference, my cluster is also in mixed-mode.

C_Noble · 12-14-2023

Ok so what worked was this:-I reconfigured my T1 PRI on CUCM, my test phone and the test line with default values (to rule out any errant configurations).-I configured the above items with correct values, and added 777 as the prefix on the Incoming C...

C_Noble · 12-13-2023

Im doing it from the GW now. Same deal...Everything appears to look good. Am I correct in doing this translation the way I am doing it (with a translation pattern on the inbound T1)?

C_Noble · 12-13-2023

If you see an inconsistency between 435 and 455 its because I was changing some numbers up prior to posting on the internet for everyone to see. Rest assured I have the correct number in place.Totally, did not know you could do a DNA from a source g...

Member Since	‎04-02-2018 09:55 AM
Date Last Visited	‎07-25-2024 05:42 AM
Posts	48
Total Helpful Votes Received	21

User Statistics

User Activity

Call Manager FIPS Mode Enablement

Call Manager - System Server - Node Name Change

Inbound Called Party Translation Across MGCP T1 PRI

CUCM / UCCX Compatibility

CUBE Certificate Trusts - Secure Dial Peer

Re: Call Manager - System Server - Node Name Change

Re: Call Manager - System Server - Node Name Change

Re: Inbound Called Party Translation Across MGCP T1 PRI

Re: Inbound Called Party Translation Across MGCP T1 PRI

Re: Inbound Called Party Translation Across MGCP T1 PRI