ironman28
Beginner
Beginner
Member since ‎04-02-2018
‎02-13-2024

User Statistics

  • 18 Posts
  • 1 Solutions
  • 1 Helpful votes Given
  • 5 Helpful votes Received
Recent Badges
5 Replies
1 Accepted Solution
1 Helpful Vote

User Activity

1. We have HP laser jet pro 4100DW printers, when we are on the VPN, it won't wake up to print, but we can print to it if not in sleep mode or when it is not connected to the VPN.  We are using Cisco AnyConnect 4.10.07062.  We are using split tunnel....
We have a site to site VPN tunnel setup between the two ASAs, on the switches the ip route 0/0 goes to the firewall.  We will be adding a point to point connect between the two switches, would it be an issue if I have both of them running at the same...
We would like to use IPs we own with our ISP.   We have an ASN number xxxxx, does ISP handle all the BGP for you or you would need to configure BGP on your network?Also is safe to connect ISP handoff to the core switches?
We try to deploy PC image to computers over the LAN.   When the desktop is on the same VLAN (VLAN 100) as the servers there is no issue.  When the desktop is on a different VLAN (101) which can reach the image servers no problem but it keep failing. ...
We have users able to RAVPN to an office, but can't access another office.  There is a site-to-site VPN tunnel between the two offices.  The IPs user get when the remote in is 10.10.20.0/24 and the site they try to get to is 172.16.30.0/24.Is this a ...
Community Statistics
Member Since ‎04-02-2018 11:44 AM
Date Last Visited ‎02-13-2024 06:03 AM
Posts 18
Total Helpful Votes Received 5
Helpful Votes From
Helpful Votes Given To