Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am getting the following error when issuing the command:
audio-prompt load flash:en_bacd_allagentsbusy.au
Is there a recommended method for creating these prompts under OS X currently ? I used Audacity, as well as Adobe Audition to create mine, bot...
Hello all, I am trying to create an extension that will get through to a handset here in our office and will display a message to the effect of "IMPORTANT INCOMING CALL - PLEASE ANSWER" and have that linked to an extension that is only known inside t...
When reading the documentation for the SPA525G2 phones, it states that when enabling DnD, the call will go straight to voicemail if you have voicemail on the system ? My problem is that, the call acts the same as a normal incoming call, just doesn't ...
Here is the scenario. I have a public and a private VLAN setup (public 192.168.2.x, private 192.168.1.x) on purpose I don't want people to be able to hop directly between Vlan 2 and Vlan 1 which is fine, BUT the web server for the organization is loc...
Here is the scenario. Vlan 1 - 192.168.0.1/255.255.255.0Vlan 2 - 192.168.3.1/255.255.255.0Vlan 1 - Office LAN TrafficVlan 2 - Public accessVlan2 has Cisco 1130AG AP running on it, sending through to 192.168.3.0 for the DHCP (2 pools setup, one for ea...
Hi Sean, Attached is config (useless entries removed).Traffice from VLAN2 should ONLY flow to VLAN 1 for webtraffic on ports 80 and 443.I have a DNS server at 192.168.0.102, which has entries on the 192.168.0.x subnet, which works fine on that subnet...
Sean, I understand what you mean, BUT my DNS server (which I do have a local one) is on the 192.168.0.x network, which is implied that you cannot cross from 192.168.2.x to 192.168.1.x should I just create an entry for traffic on port 80 to allow acc...
