Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi there,We're trying to re-direct traffic between 2 subnets to a portchannel interface. The configuration is straight forward, 2 physical layer 3 interfaces combined a layer 3 portchannel on a 6509E. refer to the attachment.We tested it using tracer...
Hi,To all QoS experts out there, I've a quick question, but first a bit of background. We've around 15 sites connected via a provider MPLS cloud. The resources are centralised in one -hub- site which has the biggest throughput. Its current link size ...
Hi,We've 4 CAT3750ME configured as layer3 MPLS devices for our core network. I'm trying to configure Tacacs on these devices but I'm facing some difficulities.On Cisco web site, I found the document titled "Per VRF for TACACS+ Severs": http://www.cis...
Hi All,Just a quick question about static translation.What will happen if a PIX has the below two statements:Static(dmz1, outside) ServerA ServerA netmask 255.255.255.255Static(dmz1, outside) ServerB ServerA netmask 255.255.255.255Issuing show xlate ...
Hi lads,I'm after an explanation on how to use static and dynamic translation on a PIX. I've read couple of books and few cisco documents but all explain the syntax and its parameter. So now I'm more confused that any other time, as every book explai...
Hi Giuseppe,I just CAN'T believe it... I looked into my configuration tens of time to not realize of this error.I'm totally aware of the difference between ip default next-hop and ip next-hop but I never saw it!!Thanks for your detailed eye DanielPs...
Hi Roland,All switches are 6509E's, running s72033-ipservices_wan-mz.122-33.SXI2.bin.The next hop is directly connected. Local Po6 ip address is 172.16.0.162, and remote's ip address is 172.16.0.161.Daniel
Hi James,I've almost an identical scenario, a 7201 router connected to the MPLS cloud using its Ethernet port but with less number of sites. I'm attaching a high level diagram so you'd have an idea about my case.
Hi Markus,Since I posted my initial question, I went and I did similar configuration which is under test. The only problem I've to to find a good freeware traffic generator.Thanks for letting me know that someone did similar thing.Cheers,Daniel
Hi Kevin,I'm attaching the Excel file showing the different figures. The other interesting point is the values showed in Column I. It looks like on the way back the value is always equal to the CIR despite we're not policing on the egress!The test la...
