Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have a cisco 7200 with a bad image.Problem with this router is it has no xmodem command.I have the flash card and the ios file and a backup file of the router.How can I upload the ios image to the Smart Modular Technologies Flash card using the ...
Hello,I was searching on the net on how to configure the received calls via the FXO ports to a FXS port on the same router.I can receive the calls from the FXO to a FXS on another router using the plar command. On the router I have 2 FXS and 2 FXO po...
I have a wireless network using 5054 (Proxim). Routing on the units is not very good. I want to route everything using a the Cisco router.How can I start routing using a Cisco Catalist 2912-XL-E and a Cisco 1750 or 2621?The attachment has my existing...
I have 4 wireless link (Proxim 5054), routing on them is very poor and hangs.I want to use a Cisco router and use the wireless links as bridges.QuestionCan I use the Ethernet switch ports on the cisco 1800 as different network and route them, or do I...
I am modifying a TCL 2.0 script and I am trying to issue a "aaa authorize" command that will include the DNIS (Called-station-id). The Cisco sends the authorize request but it doesnt have the DNIS in it. It does have Calling-station-id and other AVs....
Thanks,I tryed the example. But when someone calls the FXO line, the routers pick up in the first ring and then gives a dial tone.voice-port 1/0/0 description FXS Analog Phone 1!voice-port 1/0/1 description FXS Analog Phone 2 !voice-port 1/1/0 connec...
I was wondering if I can do the same using the 2621 router or any other router, using some IOS and have the VLAN ports on the Cat 2950-12, and routing to those interface?
The 5054 with any version of software one can not force them NOT to do RIP if you are routing.I had to trick them to use RIP Ver 2 using simple password and insert a bad password. This will not update the routing table via RIP V2.Problem routing on t...
