Hi All,How to find out my Switch is having CATOS or IOS ? 5 Ethernet Ports in one module are not working.Rest of the ports are working fine. Any workaround ?
Hi All,I have set branch offices connected to central office using leased lines and ISDN lines as backup.The dialer interfaces configured in braches to dial to central office are dialing to central office when leased line goes down but not able to ex...
Hi All,I have a leased line 512K to connect internet. Which is basic Cisco model with part numbers to buy ? Need : One Serial Port can Support upto 2MB, Fast Ethernet, One BRI Port. I need Router model Number and part Numbers.Thanks AS
Hi All,I have a router cisco 2503, I need to know what is Max. speed supported on serial interface? Presently we have 128KB leased line, and want to know weather I can upgrade the leased line to 256K with the same router ?THanks,A.S
Hi all,I have a small network and need to deploy firewall. can you suggest me the model of a firewall which has two ethernet interfaces and can be an entry level.Thanks,Suresh
Hi Amith,I have attached the output of the two commands.Switch # sh diagnostic result module 3module 3: Overall diagnostic result: PASS Test results: (. = Pass, F = Fail, U = Untested) 1) linecard-online-diag --------------------> .Switch # sh v...
Hi Balaji,I have verified the configuration and the problem is Central Office router not able to map the dialer interfaces to Physical BRI interfaces.It is found out when I see " Show interface DialerX ". But when I see "SHOW ISDN ACTIVE" router show...
Hi GP,Entire Router configuration is posted.My question is when leased line goes down, Which dialer interface is activated and why? Requirement is : If Dialer1 fails to connect to branch, then Dialer2 should dial to Region, and incase both dialers fa...