Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've got 7206 IP/FW/IDS 12.3(11)T3The very strange problem: 1) half of SMTP trafic does not flow from Internet to my inside SMTP server (public address) Though I turned all signatures off except HTTP block2) inside FTP clients can not get some files...
Radius Attribute 31 (Calling-station-id) is not send by 7206!----------------------------------------------7206-NPE-G1 with Version 12.3(10b) (c7200-is-mz.123-10b.bin)Is working as a PPPoE terminator for DSLAMsOf course we're expecting all standard ...
There are 10 DSLAMs; Neccessary to migrate to MPLS network;Each DSLAM connected through 802.1Q trunk to the one PPPoE terminator, there are many vlan subinterfaces with PPPoE enable on.The question: how to tunnel the each DSLAM trunk to one trunk con...
There is a LAN core as two of Catalyst 65xx.7206 is way to connect this core. 7206 uses two Gigabit interfaces. One attached to first 65xx the second is to second 65xx.one moment we need only one 7206's interface and we'd like to have the other one a...
Why not to strat a few PPPoE servers? As number of customers run out of one PPPoE terminator abilities.As RFC 2516 says PADI is asking ONE OR MORE terminators (which send answers as PADO).The idea is to share CPUs and abilities among several PPPoE s...
>do you see any IPS signature alerts ? As for syslog - NOWhen I disable signaatures they stop to flow to my syslog>You can configure and provision IOS IPS using SDM. Well, what about CLI? Is it mandatory using SDM?I don't have SDM now, of course it i...
Thank you,I didn't face the problem yet. When I face it is to late and been fired because I need to build large and critcal metro network.Of course it is neccessary to tune STP on a big ring and use RSTP or PVST (though I in a doubt whether use jus...
