Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Okay in Unity I have a call handler setup to take care of a department and direct a caller to different people. I check the recording to make sure its correct and it is. I have a pilot point and hunt group configured so that during business hours it ...
Okay in Unity I have a call handler setup to take care of a department and direct a caller to different people. I check the recording to make sure its correct and it is.I have a pilot point and hunt group configured so that during business hours it c...
Im upgradeing the aironets.I downloaded the firmware upgrade so that is is compatible with CAC from here http://www.cisco.com/cgi-bin/tablebuild.pl/aironet_350_series_ap .The file is a .img extension.When I go to the upgrade section and choose the fi...
Need some help to clear up some confussion im having.I have switchs configured for 3 Vlans.1(data) ,10(voice),100(manage).Heres my Phone/Computer port config-------------------- switchport trunk encapsulation dot1q switchport mode trunk switchport vo...
These can be hot swapped right?Is there a procedure to follow before inserting these into 3550 switches?Is there a different procedure for Copper or Fiber GBICS?Thanks for reading.
I am using version 3.3 but will be going to 4.x VERY very soon.When i directly dial the pilot point I get a busy signal correct!What are the steps to associate the pilot point with the correct user. I thought I had done that correctly. Thanks for the...
I believe instead of the port doing the "Listening" and "Learning" process of STP it just starts forwarding and recieving packets.The reason people enable it in alot of cases is to allow DHCP clients to get an IP address, otherwise it causes problems...
I took over a network and am fixing all the loose ends, or trying to.And yes there are links to switches with different Native Vlans configured for them (Switch A - Core Native 100[Management] | Switch B - Core Native 1[Data]). I was wondering what t...
Im in a simliar situation.So thats why I asked for more details :).And yeah I can't think of anything else to help you alleviate the down time.not sure.
