Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a client who has a fax machine connected to their ATA 186 that is configured in thier CUCM 7. No problem with incoming and outgoing calls, it can receive fax messages from PSTN. The problem is it can not send fax messages, the status is conne...
Hello,I need some idea with regards to our 1310 bridge. It was operational for more than a year and suddenly connectivity is lost. If in back to back mode, two bridges are ok. If connected at in actual distance (3km), no association is found.We have ...
Hello,Anybody can give me some inputs why a 3508xl switch with 1000BaseT GBIC installed will give very slow round trip time (more than 10ms) if its management ip is ping from a directly attached PC with Gigabit NIC. But if this PC will ping the serve...
Hello,Would like to ask inputs if PIX 506 on the remote end will work with a site-to-site vpn setup wherein Firewall at the HQ office is using Sonicwall Firewall with capability of site-to-site vpn?Is there a workable setup already just like this sc...
Hello,Can somebody give me docs on how to configure rate limiting feature of Cat3550 switch. What is the required IOS image for this feature.Looking forward to hear your great ideas.Thank you.Vivira
Thanks for your reply. We did try forcing the speed and duplex already of the PC NIC and yes there was a diff but not that consistent. Most of the time, the latency is really much beyond 10ms. At the switch side, we cannot force its speed coz the GBI...
