Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I need to implement BGP conditional advertisement with non-exist-map, but in a different logic.
As by the book, BGP will advertise prefixes listed in advertise-map only if the routes matched in
non-exist-map do not exist, but if at least one of ...
Attempting to set up ASA 5505 VPN firewall behind NAT router within my network to allowclients to connect with Anyconnect to the ASA FWNAT router staticly translates all incoming SSL VPN requests towards its public interfacefurther to the ASA firewal...
Hello,Anyone has any idea how to clear old logs, tables and events from IME server (not on the sensor itself)as it collected 13GB of data under C:\Program Files\Cisco Systems\Cisco IPS Manager Express\MYSQL\data\alarmDBI did adjusted values for archi...
Trying to configure RTBH. Pretty standardsetup:1. static route on the trigger with a tag2. redistribute that static into BGP and assign community value3. advertise it to an ISP edge router w/ the next hop of 192.0.2.1/32 so ISP will drop traffi...
Hi Guys,I'm trying to connect my c3550 switch as aCE to PE with BGP. c3550 running 2 VRFs.When I place interface facing PE into oneVRF and run BGP on it to peer with PE endpeering wouldn't work. If I remove that interface from the VRF all works just ...
Unfortunately this is not an option, as each branch router has a bunch of networks and subnets that cannot be summarized as they are all over the map
Yes, first statement is correct, if MPLS goes down, then no prefixes are to be redistributed into the branch LAN on CE and all the prefix exchange shifts to iBGP backup (I've just updated the diagram, marking where is what for clarity).
Your second s...
It's fine. Branch subnets are advertised from the branch: both via iBGP (via backup WAN) and via EIGRP (towards MPLS), no redistribution at the branch routers [only CE does that to inject prefixes into MPLS at the branch]. These prefixes make to the...
Hi Philip, Looks like a great feature. However it looks like it can run only on Cisco IOS XE Release 3.10S/15S and my routers in here are pretty ancient.
There is another option is running GRE from CE to CE to make all EIGRP prefixes of type interna...
Hi Jon,
Here are couple clarifications: Within the branch office, the only redistribution configured is on the CE router, where eBGP from PE-CE link is redistributed into EIGRP that facing a couple office routers. On these two routers there is no r...
