Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm hoping someone can assist...I've been having a major problem with our Internet service. Our ISP insists it's the firewall.I'm not a Pix expert by any means, but here's what's happening:- Our Internet service drops.- When this happens I try to pi...
Hello,I have 10 AIR-LAP1131AG-A-K9 connected to a 4402 controller. I have a couple of questions:- When I go into CONFIGURE/ACCESS POINT, one of the AP's has the message "**Configuration is different on the Device**". How do I connect directly to th...
Hello ...Can someone tell me how I can see a list of clients connected to a specific access point using the WCS? I cant seem to find the location in WCS that provides this info.Also - can I specify which AP the client connects to via the WCS?Thanks,
Hello,I'm learning as I go and am having some problems with an ACL:Extended IP access list 120 permit tcp 172.17.0.0 0.0.0.255 host 172.16.1.7 eq 15871 deny ip 172.17.0.0 0.0.0.255 10.0.0.0 0.255.255.255 deny ip 172.17.0.0 0.0.0.255 172.16...
Hello,We have a Cisco PIX 515r and currently our users install the Cisco Client on their desktops/laptops and connect to our VPN.Now I'm being told I need to set up a VPN tunnel for a remote IP phone. I have no idea what I need to do on the PIX for ...
Thank you! THe problem was related to #3. I had to change the IP address of the DHCP server on the interface.Going back to the error message: Should I be concerned the AP is reporting a different config from the controller? Is there a way to conn...
Knew I forgot something,,,interface Ethernet0 ip address 172.16.1.1 255.255.255.0 ip access-group 130 in no ip directed-broadcast media-type 10BaseT! interface Ethernet1 ip address 172.17.0.1 255.255.255.0 ip access-group 120 in no ip direct...
