VPN Tunnel?

[TheJax2009]

Hello,

We have a Cisco PIX 515r and currently our users install the Cisco Client on their desktops/laptops and connect to our VPN.

Now I'm being told I need to set up a VPN tunnel for a remote IP phone.  I have no idea what I need to do on the PIX for this! (am by no means an expert)...

Can anyone tell me how this can be done or direct me to a set of instructions on how to do this?

Thank you!

[Federico Coto Fajardo]

Hi,

The PIX can support both remote access IPsec or Site-to-Site IPsec tunnels simultaneosuly.

If you need to add another remote site (client), just connect it.

If you need to add a Site-to-Site tunnel, you need to configure a static crypto map peer with the VPN settings matching on the other end.

You can follow this example that shows a S2S to another IOS router:

http://www.cisco.com/en/US/products/ps5855/products_configuration_example09186a0080a9a7a3.shtml

If you're running a pre-7.x code, the configuration is different.

Hope it helps.

Federico.

[TheJax2009]

Sorry..I should have added that we are running v6.x...how much different is the config?  Can you shed some light?

Thank you for your reply/

[Federico Coto Fajardo · Accepted solution]

Here you go:

http://www.cisco.com/en/US/docs/security/pix/pix63/configuration/guide/sit2site.html

Federico.

[TheJax2009]

thank you so much!