About from88

from88 · 09-12-2024

Hello,I need 1x Ipsec router with 2x10G SFP interfaces, which would support ~4-5gb/s throughput of tunneled IPSec traffic. With no need of anything like DNA, just basic routing and ipsec f-nality.The one we looked for was: Cisco 8300-1N1S-4T2X, but t...

from88 · 06-03-2024

Hello, have couple of NCS-5501-SE (version 7.5.2) routers. I would like to reset the current configuration.What would be the most recommended way ? Do commit replace is still relevant for resetting the configuration ?I've read that some people are do...

from88 · 10-18-2023

hello,We've and old pair of N9K-C9372PX-E (7.0(3)I7(8)) running Straight Through VPC with lots of FEX devices. We're planning to update it to nxos.9.3.12.bin.Everything is prepared, but we found out that there're some strange traffic on VPC Peer-link...

from88 · 09-19-2023

Hello, community.After migration to Nexus9000 C93240YC-FX2 with NXOS: version 10.2(5) from old Nexus (5000 series). Strange things with one server started to happen. Problem is that data domain server connected to Nexus works only with one or two int...

from88 · 07-17-2023

Hello,We've bought NCS-57B1-5DSE-SYS with only 100G/400G interfaces. Because our old NCS-5501-SE has few 10G (CWDM and simple Single Mode) interfaces used, we decided to buy some CVR adapters (CVR-QSFP-SFP10G) for that case from quite trustable 3rd p...

from88 · 09-12-2024

thanks, now i'm confused - here it seems: That Cisco 8300-1N1S-4T2X supports ~5Gb/s IMIX crypto performance.

from88 · 10-18-2023

the data traffic in ethanalyzer, really ?The bad thing was that we didn't know the IP neither MAC. i think that old software running is buggy, with a help of SPAN we noticed that to one particular destination the traffic is comming via VPC link, even...

from88 · 10-18-2023

Thanks, yes, but it shows only control plane traffic, and it doesnt show the source interface of the packet, or it does ?

from88 · 07-17-2023

thank you, i already checked that post, i need someone's confirmation if it differs or not. Because in the practice line default configuration seems like to applies on console line, without using line console.

from88 · 07-11-2023

.

Member Since	‎04-29-2010 12:47 PM
Date Last Visited	‎09-17-2024 02:33 AM
Posts	333
Total Helpful Votes Received	57

User Statistics

User Activity

Ipsec router with 2x10G SFP ports, which would support ~5gb/s IPSec

clearing current configuration of NCS-5501-SE

Strange VPC Nexus traffic

troubleshooting flapping / error disabled interfaces

QSFP to SFP adapter for NCS 5700

Re: Ipsec router with 2x10G SFP ports, which would support ~5gb/s IPSe

Re: Strange VPC Nexus traffic

Re: Strange VPC Nexus traffic

Re: line default vs line console

Re: Differences in software upgrade between NCS-5501-SE and NCS-57B1-5