Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Moving from Checkpoint to ASA. Migrated about 20% of my policies earlier this week and had to back out one. ftps from 10.60.10.205 (inside) destined for 65.217.149.5 (prod-outside). Users got error message 500 Illegal PORT range when entering pasv...
Working on a NAC deployment and cleaning up some legacy wireless issues. Currently, Guests are forced to hard-code their proxy configuration parameters. Honestly don't know why as this was deployed prior to my arrival. Trying to clean that up thou...
Avaya S8700 <> h.323 trunk group <> CCME 4.0.3Inbound calls over IP trunk disconnect when forwarded to AIM-CUE upon noan or busy. No problems observed when call is answered. Nor are there issues with inbound calls to same number placed over POTS li...
Is there an ephone-dn or ephone hunt-group equivalent to the 'voice hunt-group x parallel' command in CME4.0.3? I would like to simultaneousily ring four stations. If noan after 20 seconds, then forward it to a voice mail.
I tried the same thing. Untimately determined I was running into CSCsx68765, VMWARE webapplications (view/vdm) do not work with smarttunnel.Has anybody been successful in implementing the workaround? After establishing the clientless SSL vpn connec...
It appears outbound request for data channel is being blocked. The server side randomly assigns a high port in pasv mode. My client then attempts to connect on this high port and is being blocked. FTP inspection would normally pick this up and all...
Unfortunately my user and their login credentials have left for the day. I'll try tomorrow am EST. Unsure this will make any difference. I'm not seeing any drops in the logs.
Nope, anonymous bind is not enabled. That's the source of my problem. Unfortunately, policy won't permit me to enable it either. I guess ACS appliance is the longer-term fix. In the meantime, I can change the user requiring this access. Thanks f...
