Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I read everything and it's opposite about ASA in cluster/load-balancing mode and how they handle SSL VPN, client IPSec VPN, Site-to-site VPN...Someone can clarify to me the situation? Can we do Client SSL & IPSec VPN on a ASA cluster?Site-to-s...
Hi,I have 2 switchs C2950 that are connected trough a 10Mb link... I would like to use QoS setting that force the switchs to allow more bandwith to the packets with the DSCP field modified...How to do so that the switchs check the ToS field and then ...
I would like to upgrade the IOS software of a C6500/Sup720 switch. The switch is running on a 12.2.(17d)SXB1 version, and when I use the IOS Upgrade Planner in order to find a proper version, this one does not match with all of my needs.My features a...
Hi,I don't know if you already know that but the SupII and the Sup720 cards must be installed in differents slots.I mean, Supervisor Engine 2 is installed in slot 1 and slot 2 but Supervisor Engine 720 is installed in slot 5 and slot 6 on the Catalys...
HiYou can use this "port-channel load-balance src-dst-ip", this will do a XOR on source & destination IP addresses and choose the interface G0/1 if the first bit of the result is 0 or the interface G0/2 if the first bit of the result is 1.But you can...
Thanks for your reply bobby,Sorry, I wasn't clear enough, as mentionned in this document: http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_guide_chapter09186a0080160a5a.html#wp1036881 - I need a Release 12.2(18)SXE or late...
Hi,If you stack one EMI and multiple SMI, with the EMI switch as master, the SMIs will be able to act like they are EMI, i.e advanced routing, private vlan, etc...But if the EMI switch failed, a SMI will be Master and the stack won't be able to imple...
