Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear fellows: Does anybody has configured Paging in CallManager 5.0??, I Did in CallManager Express 4.0, but I did not found any feature in CallManager 4.X nor 5.X, even I searched in 6.0 features but nothing appeared with this name....Could you help...
Dear fellows, does anybody tried to register an 7906 with SRST??? in the release notice they said that is supported, but it is not true, i tested with srst3.3, and 4.0, does anybody can help me?I have a 4.2(3)CALLMANAGER and srst is in a 2851 with 12...
hell0: I have a hub and spoke topology, with 10 spokes, each spoke has two links to the hub, they are hdlc links, one of 1mb , and the other 256k, all spokes are conecting the same way, the problem is that I can not get unequal load balancing for eac...
This is an example with CCME 4.2:In this example, paging calls to 2000 are multicast to Cisco Unified IP phones 1 and 2, and paging callsto 2001 go to Cisco Unified IP phones 3 and 4. Note that the paging ephone-dns (20 and 21) are notassigned to any...
Thank you for your response, I tested this config, but with this, Always respond the first telephone that answer the call, others get idle besides that, I need a second line in each phone to implement the feature, so I can not do this with 7911/06, e...
Hi, I am having same problem with a 2821,with same configuration, during congestion period, voice break-up, This 2821 replaces an 1751, customer did not have problems with 1700, but when we put 2821 in service, problems arose.The configuration is the...
I don't have the configs right now, but I tested the configuration changing variance(up to 128) and maximun-path( up to 16), but nothing happened.perhaps i have some problem with feasible successors
