Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Currently running a WLAN with around 75 APs. Due to problems with the 7920 Cisco VoIP phone, we decided to implement Fast Secure Roaming with CCKM. Now we are in need to find a WDS that is able to support 60+ APs. Converting an AP to a WDS machine wi...
Is there a way to establish a round robin behaviour for picking the transmit port within a channel? Using the regular methods (src-mac, dst-mac, src-ip, dst-ip etc.) you end up with the bandwith of one single link of the channel for one tcp connectio...
Suppose you have router with a 100Mbit-Ethernet-Interface. To seta CoS value (outgoing) according to IEEE802.1p you'll have to set up a IEEE802.1Q-trunk.The native vlan is non-tagged, but can also be sent as a memberof the (then virtual) vlan 0 (null...
Attach a regular Ethernet-NIC to a dot1q trunk port.Traffic on the native VLAN will be transported to the appropriate protocol stack(s). Question: What will happen to frames comming in with a tag (VLAN-ID not 0)?Is it correct to assume that those pac...
Why is it 4/(25+25+25)?I thought it is 25/(25+25+25) thus the factor should be 0,333.And there is the additional command "srr-queue bandwidth limit 50" shaping to a overall bandwidth of 5 Mbit/s (50% of 10Mbit/s).So 5Mbit/s overall, minus 2Mbit/s of ...
Well, all I tried, but there is no STUN support with the 7960. Even in 7.5.The NAT-Enable/NAT-Address parameters will enable another method to be able to cope with the SIP/NAT problem. I'm not quite familiar with that. But something with a "received=...
Same problem with 7940 at a 3524-PWR-XL port.Phone will get an DHCP reply from an DHCP server within the data VLAN, which is the native VLANon the dot1q-trunk to the phone. It seems thatthe phone is not only sending DHCP request on the voice VLAN, bu...
