Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am experiencing a problem with my EVPN multi homing implementation and I wanted to post this question to see if anyone might be able to assist. The problem I am experiencing is EVPN multi-homing with ESI actually works on my fabric overlay with N9K...
Anyone have any luck or experience sending REST commands to ACI? I am running ACI version 1.2(3c) and having no luck using two specific Ansible modules to send REST code to the APIC. Wanted to know if anyone has any advice or suggestions on the best ...
I wanted to ask a question on route leaking between VRFs on switches running HSRP. If I configure several HSRP vlans between a pair of switches and apply different VRF tags to all of my HSRP vlans, how how can I leak routes between them? Every exampl...
I am trying to get my APIC controler cluster up and running. I got the first APIC controller to be configured, but the next two I want to have in my cluster when I run the setup utility I never get prompted to enter a password. I then use the resue u...
Hey Masoud sorry about the delay, but I found the answer to my problem. We decided to use a VSS pair of switches with the 2T Sups. Using VSS allowed me to have the same control plane shared across both switches where I can create all my VRFs. It was ...
To add to my last comment, it seems from what I researched MP-BGP is best to leak routes using import / export route maps and maybe a neighboe peering is needed between the switches so both have the same route tables (VRF or global). I appreciate you...
Hey Masoud thanks for the reply back, the purpose of this design is to terminte different customers in seperate VRFs, but give them all access to a shared common VRF. So for instance three different customers in there own seperate VRFs are isolated, ...
Would it be better to run an IGP like OSPF between the switches with seperate MP-BGP instances on each switch? Or would the seperate BGP instances as the only dynamic protocol be better?
Hey Masoud thanks for replying back. I guess that is what I am not sure of, would you need to run MP-BGP on both swithces and form a neighbor relationship between the two switches? Or will you run a single seperate BGP instance on each switch?
