we are installing several sprint point to point T1's, i want to verify my configuration this is configured on acisco 2811 router.THANKScontroller T1 0/1/0 framing esf linecode b8zs channel-group 0 timeslots 24!controller T1 0/1/1 framing esf linecode...

this is have a preliminary config on a cisco 2811 with one t1 wic on slot 0and a vwic-2mft-t1 on slot 1.i want to split slot 1 interface to 2 resite I a ordered 2 PPP circuits.The one site on s0/0/0 we are installing an Avaya 350 gateway.is the confi...

can i use a 1 of the interfaces on vwic-2mft-t1\e1 for voice and data? we are implementing a avaya 350 gatway at are remote site that will be communicating with are avaya definity s8400. and the other interface to another remote site just for data?if...

I have just purchased a 2811 rtr with an nm-cem-4te1 module and it seems that it does not come up during the boot proccess?I loos like the it on the 2811 that 1 is the slot number?thanks for your help

this us our first remote site that we want to implement voip and data over a PPP circuit. on the remote site we are using an Avaya 350 gateway using digital phones not IP phones. does the 1841 provide voip services I read it does passthough only? not...