About Marcin.Bachmatiuk

Marcin.Bachmatiuk · 08-19-2023

I have a problem with the Cisco SG250-08HP switch, after connecting it to the power supply, the System LED flashes green, after a few moments all LEDs in the lan ports light up and the procedure repeats over and over again.What is wrong ??

Marcin.Bachmatiuk · 02-04-2022

Hi,i have a problem with authentication in WLC 9800-L, I have configured the Radius servers and SSID, but the client cannot authenticate himself to radius. Feb 4 16:16:34.041: %DOT1X-5-FAIL: Chassis 1 R0/0: wncd: Authentication failed for client (80...

Marcin.Bachmatiuk · 08-20-2023

Thanks for the hints, but now none of the ports on the switch are working.Unfortunately, this switch does not have a console input.Holding the reset button for more than 10 seconds does not help.

Marcin.Bachmatiuk · 02-08-2022

Hi,In the attachment screen from wireshark, maybe something will help

Marcin.Bachmatiuk · 02-07-2022

Hi,Thank you for your help.Unfortunately, I am not fluent in reading logs by wireshark. What should I look for?

Marcin.Bachmatiuk · 02-04-2022

This is where the problem is that I got the data from the company's headquarters on the WLC 5520 which is working now everything is OK.Unfortunately, the RADIUS server cannot be accessed I checked sh aaa servers detailedRADIUS: id 1, priority 1, hos...

Member Since	‎04-13-2018 05:18 AM
Date Last Visited	‎08-27-2023 06:27 AM
Posts	6

User Statistics

User Activity

SG250-08HP - the led flashes

WLC 9800-L - Authentication failed for client

Re: SG250-08HP - the led flashes

Re: WLC 9800-L - Authentication failed for client

Re: WLC 9800-L - Authentication failed for client

Re: WLC 9800-L - Authentication failed for client