Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hii'm trying to set up SSID Tunneling. I used this documentation: SSID Tunneling and Layer 3 Roaming - VPN Concentration Configuration Guide - Cisco MerakiThe MX is in passthrough mode und has a cable in "internet" and Port 3. But i get a BPDU Error ...
Hi, a customer bought a bunch of Cat 9300 and 9600 with Version 17.3.3. the Switches are located in an air gap environment. so they will never be connected to the cloud or a CSSM. This environment should run at least 2 years without "touching it".Wha...
Hey, i've installed ISE 2.7 with Wireless & Wired NAC. Goal is to have a global Port Configuration which is the same on every device.switchport access vlan 332
switchport mode access
authentication event server alive action reinitialize
authentic...
Hi, my Customer has some strange behaviors on his Switches with some clients.First the config (Closed Mode): aaa group server radius ISE
server name cisco-nac01
server name cisco-nac02
!
aaa authentication dot1x default group ISE
aaa authorization...
Hey folks, i'm trying to get this working. i jsut want a captive portal popping up when a wired client runs in the default rule. i tried with 2960s and 2960x. and with different versions. it only works (i type e.g. www.google.com and i get redirected...
Ok with some research i figured out by myself... problem is/was the firewall ... (see pauls post here: https://community.cisco.com/t5/identity-services-engine-ise/no-redirect-on-wired-guest-portal-ise-v2-4/m-p/3701948/highlight/true#M17593) firewall ...
Hey Damien, thanks for your reply. I tried out what you said but no chance... it doesnt work. As is said, i can copy the redirect url out of the logs of the switch and can access the login page of the ise.But the f****** redirect doesnt work. i tried...
Found the Problem by myself.i just wr erase the hole ASA and uploaded the config back per tftp in running config.ASDM works now.. no idea why but it works.
