Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
So we're currently running LMS 3.01 which goes out of support in November/December 2012.We're also running Cisco WCS 7.0 in a completely seperate environment where we have wireless.Also please consider we have LMS fully integrated with Cisco Secure A...
According to the following:http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015c612.shtml#topic5"Only one destination port is allowed per SPAN session"however on both 2960 switch running 12.2 and 3560 switch running 15...
Hi there,Need to limit the amount of bandwidth a specific VLAN can use on a 802.1q trunk port.Situation is that we have a pair of Catalyst 4506 switches which have 802.1q trunk ports into a Checkpoint Firewall, this in turn is connected to a managed ...
Hi there,We're using the internal DHCP server on our 5500 Series WLC which works fine.However on one WLAN we ran out of addresses so changed the subnet from a /25 to a /24.The problem is that the router/gateway is still in the middle (124/125/126) an...
Hi,Don't tend to use Cisco VPN but have setup one for a development environment.This is on a PIX515E running 8.0(4), relevant sections of configuration below:aaa-server vpn protocol radiusaaa-server vpn (inside-inf) host RADIUSkey *!crypto ipsectrans...
There are two schools of thought to this.There are those who like myself have worked in the IT industry for a long time and can recall the early days of auto-negotiation where different vendor devices wouldn't auto-negotiate together due to differen...
Sorry for not replying sooner, tied up with various major projects.Thanks all for the feedback, indeed I think the documentation is out of date, the configuration works perfectly for what I wanted to achieve (take the output from a bunch of port prov...
Now solved was a permissions issue in ACS.However this raises an interesting "issue" with CSM and its interaction with ACS. According to the CSM 4.1 Installation Guide: http://www.cisco.com/en/US/docs/security/security_management/cisco_security_m...
Having exact same issue here.Have checked local account, system identity account and equivalent in ACS and all look ok.Checked that the ACS admin account is setup correctly.User has Administrator rights to CSM shared profile components.No failures i...
