Hi there,
We're using the internal DHCP server on our 5500 Series WLC which works fine.
However on one WLAN we ran out of addresses so changed the subnet from a /25 to a /24.
The problem is that the router/gateway is still in the middle (124/125/126) and not easily changed.
I've moved the WLC interface to the top of the subnet (251) but the router is more difficult as its externally managed/controlled.
So is there a way we can create a DHCP pool of .1 through 250 on a /24 mask but exclude 124/125/126?
Thanks
Mike
PS - Router subnet masks were changed so can see whole subnet.