Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
i have a couple of these that appear to be completely wiped, booting to rommon i have tried images from 844-1 to 9-12-4-67 every image i tftp boot from rommon comes back with This is an ASA image and cannot be loaded on a PIX platform if anyone could...
struggling trying to get this working with site-to-site tunnels, local subnets to tunnel and tunnel to local subnets work as expected, however from tunnel a to tunnel b no traffic, packet tracer shows everything is good but no go. any ideas would sur...
phishing scams now using https, simple outside ip host to any deny not working, inside any to ip host deny not working anybody have any answers seriously frustrated
working with 3845 w 2 nm-16esw-1g network modules having issues with connectivity across the trunks i have also duplicated the issue with gns3 so i must be missing something simple, if anyone could shed some light on what im missing. for reference he...
simple dot1q trunk but has me stumped, GE0/0 on the 3850 2 sub-int vlan10 vlan11 to GE1/0/1 switch port mode trunk. on the 3850 vlan interfaces protocol won't come up, if i switch to NM-16ESW-1GIG with switchport mode trunk protocol comes up, i have ...
the sg300 in L3 has the most useless set of management functionality I have ever seen, can't do a simple ip change on the same plan without first creating a new ip on a different vlan and new route just so you can redo everything again to put it back...
these are active production tunnels so there is other traffic not just my test, as far as firewall on opposite end, i have multiple subnets routed further downstream on the inside edge of the asa and all are functional both directions with these tunn...
