Hello,We are connecting a Cisco 1841 router (WIC 1T) to the PE router and running an encapsulation frame-relay.We are not able to ping between both the devices even though the connectivity is fine. Below are the observations for your referencea) We h...

HelloWe are using Voice card on the 2800 chasis: c2800nm-adventerprisek9-mz.124-20.T2.bin"Customer has inserted two port EM voice interface daughtercard but I cannt locate the voice port under "Sh run"Output of Sh invent-----------------NAME: "2nd ge...

We Have an end to End IPSEC Tunnel between Point A and Point B.Both the End IPSEC is UP and status are as follows :-------------Point A-------------------------Router A#sh crypto isakmp saIPv4 Crypto ISAKMP SAdst src state ...

I am trying to create an IPSEC but currently is not able to get the ISAKMP phase up. I have checked the keys and it is OK. debug output***********Mar 4 07:02:43.373: ISAKMP: Error while processing SA request: Failed to initialize SA*Mar 4 07:02:43...

I would like to know the difference of these two messagesA)%SYS-5-CONFIG_I: Configured from memory by console %SYS-5-RESTART: System restarted --b) Configured from Console by ConsoleI believe the former statement is due the Cisco IOS software perform...