I am testing a Viptela to IOS-XE upgrade on an ISR1100-4G (20.9.5.1 > 17.9.4a). It's been well over an hour now since I started the upgrade? How long should it take? I am following this process:
https://www.cisco.com/c/en/us/support/docs/routers/sd-w...
Here is the tracker config:
tracker tracker1endpoint-ip 8.8.8.8
It is applied here:
vpn 0name VPN0_Underlay_VPNdns 4.2.2.2 secondarydns 8.8.8.8 primaryinterface ge0/0description INET1ip dhcp-clientnatrespond-to-ping!tracker tracker1
vedge1# show trac...
I have the following scenarion:
A site with 2 vEdges: vEdge1 and vEdge2 each with their own ISP connection.Each vEdge has a TLOC extension to other in case their ISP goes down.Each vEdge also has ZBFW enabled so traffic must be kept symmetric.On the ...
Two SDWAN edge routers each with tunnels to Zscaler. All Internet goes over the tunnel to Zscaler. If router1 loses its Internet but its LAN side is still reachable, how do I get Internet traffic to failover to router2's tunnel to Zscaler?
I believe the tracker needs to respond to http. I changed it to google.com and it works. This is pretty poorly documented but I found it on another forum.
No. When i turn off the Zone based policy, traffic works. I tried using affinity groups which then forced the hub to use vedge1 as next hop but traffic was still getting dropped when the policy was enabled. I just configured a VRRP tracker which now ...