Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi experts..!! I like to route and forward traffic to 5 public IP's to the internet and this is the senario.... I'm helping a friend who's beed assigned to provide and manage an internet connection to a rural client, and this is how the configuration...
Hi all, I have a quick question, I like to set up a pix and router for this network for a small buss, but I need to know what type of cable do I need to set this connection to work straight through or a cross over cable? also I need a subgestion if...
I have a DHCP server running out of a 2621mx and everything works as a charm when an win xp clients ask for an ip add; however, where i run into a wallis when a win 7 clients wants an ip dynamicly... the only work arounf to this issues I have use to ...
I got this message like 500 times non-stop and I have no idea what does it mean, i have a cisco 2921mx and a couple of 2900's switches hooked up in this application, however this message got me confused... any help would be apresiated.SYS-2-INTSCHED:...
Hi everyone, I'm running into an issue with an isp DHCP server, on my router outside interface we are getting a dynamic ip add from the isp dhcp server however, when we apply the access-list IN to the outside interface our internet transmisiongets dr...
No too long ago I experienced the same problem and it turned out to be my isp DNS, they replace who knows what but it took them 15 days to have our transmission back to normal.... while waiting for a fix we used google's
dns 8.8.8.8
and we were able ...
I believe it is a 6.3 (5), would I be able to assign the same subnet ip add to both inside and outside ports of the pix? actually we are implementing the pix..... to a live network..
Hi Joe, in your config-file I noticed that your router dosn't know how to get to the next hoop, so you might be able to fix your transmission out to the internet with:IP ROUTE 0.0.0.0 0.0.0.0 (ISP DNS IP) OR (ISP GATEWAY IP)hope this he...
you probably have to subnet to your router and your switch will have to go with the modem dynamic ip from your cable modem.. but here is a document for the 3550..http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12.1_20_ea2/c...
