Hi Fellows , We have deployed WLC 3504 and Customer wants to give SSID access via AD credentials for employees . We have configured WLC for getting users authenticated via LDAP integration. But domain end user getting certificate errors.Customer ...
Hello All ,
While Configuring Dynamic VLAN assignment on WLC , is there any option like in wired 802.1X , that failed clients drop in a specified VLAN . Not able to find any such option in case of wireless ? If we want to put failed authenticated...
Hello All ,
We have scenario where we want to have redundancy on Routers on which SIP is terminating via ITSP on Ethernet. The ITSP is giving us traffic on an our IP and we are handing over them to their IP a /28 subnet.
Just wanted to know if...
Hello All ,
We are translating our extension numbers to DoDs during outbound calls using voice translation rule . We have 4331 but we are facing a limit of 15 rules . I read now the IOS support upto 100 translation rules but in 4K series which IO...
Hello Guys ,
We have a one 2504 WLC with 5 AP licenses. Now for some days we want to add 10 more APs for an event. Can we use evaluation licenses along with these 5 permanent licenses to fulfill the requirement and once the need is over , deactiv...
Dear Deepak and patoberli : Thanks for your continued support . We have to come to following understanding. If we select Cisco PEAP on Client we don't need to push any certificate to end user and that's what we need . For MS-PEAP we would requi...
I think PEAP is used to avoid Client side installation of Certificates. Is there any way to work with MS PEAP which is available with normal installation of Wireless adapter ( Cisco PEAP is to be additionally installed again organization wide)...
Hi , Deepak Thanks for your response. The goal is : end user to connect the SSID using user@domain.com and AD Password ( Both Domain connected Systems and BYOD ) . At start we don't want to add another Network Element like external AAA...
Thanks ammahend ..
Surely this seems to be thing We were looking for . But what application is this ? We are using MS NPS ... Don't thing NPS has this sort of option ...