Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Forum Members,how many DLU's are required for the 3rd Party SIP Phone ASCOM VoWifi Handsets i75 for the Cisco Unified Communicantions Manager 7.0?Is it the 3rd Party SIP Phone (basic) or (advanced) Device Type?Thanks a lotBest regardsStephan
Hi,is it possbile to build a solution with one Cisco 526 Wireless Express Mobility Controller and one Cisco 2106 Wireless LAN Controller in one Mobility Group regarding seamless roaming??Thank for your answersBest regardsStephan
Hi NetPro Forum,is it possible to take the Cisco Aironet 1240AG Serie Access Points for Point-to-Multipoint installations??For example one 1240AG AP in a central area with antenna AIR-ANT5160V-R and maybe two 1240AG AP's with antenna AIR-ANT5195P-R i...
Hi @ allI think,it is a easy question.Is it possible to start a reverse telnet session over the aux port from a Cisco 2821 Router to a Console Port from a Non-Cisco Device (for Example a Lantronix Console Server)???If yes, which parameters are necess...
Hi,my customer have a Wireless LAN with one Root Access Point and a chain of 2 Repeater Access Points. All Access Point are AP 1200 Serie AP's with IOS 12.3(2)JA2.The customer use terminals with Interec ClientadapterAnd now the Problem.....The termin...
The problem is fixed now.I had a conflict with the application "MSXML Service Pack 2"I stopped crmdmgtd , uninstall this application, start crmdmgtd and the DFM works fine.Many thanks for your help
Hi Mohammed,the baud rate is 9600 und a normal Cisco Console Cable works on the console port of the console server.I used an normal Cisco Console Cable and a rolled Cable for the connection between the Cisco 2821 and the Lantronix Console Server.But ...
Hi,a workgroup bridge support only LEAP als EAP Client for EAP authentication.You have no option to integrate a PAC File to the device in workgroup bridge mode.Look at this link:http://www.cisco.com/en/US/products/ps5861/products_configuration_guide_...
