Hi,   today our wireless environment has WLC8540 (version 8.2) and more than 1000 APs. we are planning to move AP authorization from  MIC mode to LSC mode. i thought to do so with " provision list", this way to control which APs "chunks" to work with until all APs will move to LSC mode.   I saw there is a warning to work with MIXED modes, but there is no elaboration regarding what will happen if we will do so.   https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-2/config-guide/b_cg82/b_cg82_chapter_011111.html?bookSearch=true#task_FEF6FBD5B2D34C389B55FE3115013F05   ** Ensure that there is no mixed environment where some APs use MIC and some use LSC.   - is anyone have any suggestion what is the best way to move from one mode to another? (MIC to LSC) - what will be the result of working with mixed-mode through the migration period?   thanks, Oron Yaniv ... View more

Hi,   today we have two WLC 8540 in HA topology, with 8.2 software, we cannot upgrade the software because we have old APs (1142,2600,3600 etc,) as long as new APs (3800/3700). second, we consider buying a new 9100 AP series, but those APs supported by the  8540 from version 8.9.   we decided to install new  WLC8540 - stand alone, and we will migrate old APs to the new 8540, that's will allow us to upgrade the 8540 HA.   i thought to install the new 8540 as stand-alone and to stretch the  L2 between the to WLC. the L3/GW of the clients reside on the L3 switch the 8540 connected to.   which installation we can deploy? i have no previous knowledge, so i will glad for a suggestion whats the best deployment? thanks, ... View more

Hi all, recently we installed a new catalyst 9500 switches. we configured call home connecting to cisco smart account (Cloud).   we activated the license (network advantage) and checked the activation (at the switch and the cloud dashboard).   after a month we checked once more the activation, saw the switch returned to EVAL status. the only changed made this month is the switch HOSTNAME.   my questions are: 1. what is the exact process of the call home feature? 2.  which parameters negotiate between the switch and cloud? 3. how can we get Syslog about activation change? (we configured SNMP related log, output below)   the First activation output:   Registration: Status: REGISTERED Smart Account: ## "Company Account" ## Export-Controlled Functionality: ALLOWED Initial Registration: SUCCEEDED on Oct 07 15:36:35 2019 IDT Last Renewal Attempt: None Next Renewal Attempt: Apr 04 15:36:34 2020 IDT Registration Expires: Oct 06 15:31:29 2020 IDT     after a month:   Registration: Status: UNREGISTERED Smart Account:## "Company Account" ## Export-Controlled Functionality: ALLOWED       call home configuration related:   service call-home call-home contact-email-addr ## "email" ## source-interface ## "VLAN_ID" ## vrf  ## "VRF" ## http-proxy ## "Proxy_IP" ## port 8080 no http secure server-identity-check profile ## "Profile" ## reporting smart-licensing-data destination transport-method http no destination transport-method email destination address http https://tools.cisco.com/its/service/oddce/ snmp-server enable traps call-home message-send-fail server-fail     thanks for helping, Oron Yaniv ... View more

Hello All, we have PI 3.5, we have an Access/Dist Tiers. i am trying to get a notification via eMail only on the Uplinks.   i have created a Port Group - this group including only uplink interfaces. i have created an alarm       - included the Port Group.   at this point, i am trying to configure notification for that alarm, but i do not know where or how to do so, any ideas?     ... View more

Hi all, i am looking for an snmpget OID of the ״show interfaces link" output.   thanks, oron ... View more

Hi All, i try to change with postman z3 radius configuration, i get 200 O.K, but the configuration stay the same.     Put - that work fine, if i change network attribute like UTC, it work perfect:   {{baseUrl}} /networks/ {{networkId}} /ssids/ {{ssidNum}}   Body - i think the problem is under body:     { "radiusServers": [ { "host": "1.1.1.1", "port": "1812" "secrete: "RadSec" }, { "host": "1.1.1.2", "port": "1812" "secrete: "RadSec" } ], }     ... View more