Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Found AIR-LAP1141N-A-K9 with a green LED but can not connect to the wirelessly to the AP. Since I did not know the username/password, I reset the AP. Find DHCP is working and an ip address is assigned. Not able to connect using a GUI and get connect...
Is Cisco Network Assistant still being supported? If it is supported, where do I find support?With current version 5.9(9.1), I can select save configuration, a green bar shows progress but there is no backup file to be found either in the backup loca...
The Topology view can only show the devices directly connected to the logged in device. If I am logged onto switch A, then I can see switch B connected to switch A but not switch C which is connected to switch B. Correct? Cisco Network Assistant has ...
When I first configured a switch I had C2960g. Now I have C2960x.During C2960g time there was Cisco Network Assistant. When I try to add C2960x switch to Cisco Network Assistant, Network Assistant says not supported. Now there is CCP, which does supp...
Set up a C:\Pumpkin folder. Downloaded c2960x-universalk9-mz.152-4.E7.bin and c2960x-cwml.01_05_00.tar. to newly created folderInstall Pumpkin and set C:\Pumpkin as TFTP filesystem root, Give all files, Take all files. Went to switch enable prompt#co...
Looks like I can not use web. 1141 is not CAP but is lightweight LAP. Scott Fella Hall of FameConsole into the ap and issue a show version or let us know the model number of the AP. if the model starts with a AIR-CAP then it's a lightweight and you ...
Since the complaint was the certificate is dated later in time, I changed the WLC year to 2017, That changed allowed the AP to come online and I could connect a laptop. That is the solution for certificate. There was a second problem in when I try to...
I see the WLC part number was cut off. AIR-CT2504-K9 is the full part number. The ip address is 192.168.1.232 that the AP was talking to. What do I do with the AP certificate is expired?
