Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,We have recently implemented ACI in one of our client datacenter.Now, we have a requirement for implementing anycast DNS. We are using Blucat for DNS and DHCP services.Anycast servers will be configured on Blucat.Can you please help me how ca...
Hi,
We got a request from client that users want to use Airplay service on wireless.
Please help me how to configure WLC 5508 as bonjour gateway and it is implementation.
Regards,
Veera Reddy
Group of network ports on module WS-X4248-RJ45V in switch 4507 lost POE capability suddenly.Ports on the same module fa6/1-36 are getting power but not 6/37-48. It is running with IOS cat4000-i5s-mz.122-25.EWA12.bin.attached log for reference.Please ...
I see Packet loss when pinging from/to a cisco 3560e switch. CPU utilization is normal.Switches are running with IOS c3560e-universalk9-mz.122-35.SE5.bin.Packet loss is observed for all the devices irrespective of directly connected or remote devices...
Thanks Madhu.How about this config. Just want to understand the difference. Switch-1interface Vlan200ip address 10.X.X.1 255.255.254.0 secondaryip address 192.X.X.1 255.255.255.0standby 200 ip 192.X.X.7 secondary 10.X.X.7standby 200 priority 110stand...
