Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
All,We recently added a 4507E+R switch to our infrastructure. Before this we used fixed switches at our access layer. I am having a problem with getting the 4507 "pingable" via our management vlan. I have the 4507 trunked back to our 5548 layer 3 ...
All,I have a pair of 5548P switches with the L3 daughter cards installed. Using the base license as I just need RIP routing. I have the two switches setup and have the RIP routing feature enabled. When I "turn on" routing using RIP I do not get an...
All,I am using UCS 1.4 and ESXi 4.1 along with vCenter and VM-FEX, VN-LINK hardware, or whatever they are calling it now. I want to upgrade my vCenter server from 4.1 to 5.0 but I'm afraid I might have network issues during the upgrade as UCS is con...
All,I am running vCenter 4.1 U1 and UCS 1.4.1m. In UCS I export the extension key for vCenter. I then register it as a plug-in in vCenter and receive a successful message. When I go back to USCM and look at the FSM I get a warning message with code ...
don't blame VMware for changing their licensing model but they way they are doing it is crazy. The should offer "vRAM" expansion licenses. Why should we have to buy a complete license if all we need is more RAM?KenSent from Cisco Technical Support iP...
We are running code version 5.0(3)N1(1a).What I am trying to accomplish is to mark all outgoing traffic from certain interfaces. I have an iSCSI SAN that is connected to 4 ports on the Nexus 5548. All iSCSI traffic coming into the Nexus 5548 is alr...
Manish,Thank you for all your help. I understand what is happening now. We will be using the Cisco 1000v switch in our ESXi servers so do you recommend we mark the ingress traffic on the 1000v or just change the best effort class? Are there any po...
