About anasmomo

anasmomo · 08-03-2009

hi,does the GLC-SX-MM work over single mode fiber, short distance?thanks

anasmomo · 05-30-2009

Hi,i have a network that spans over two sites (site A and B), i am planning to deploy an IPTV system that uses multicast, i will place the source in one site (Site A) and this will distribute a multicast stream to clients located in the both sites, i...

anasmomo · 05-18-2009

Hi, I have IPTV system deployed in the network, there are two options from the client side to join a channel "group" either using hardware "set box" or using software that the client can install in his PC. The problem is that in the soft method the c...

anasmomo · 05-18-2009

Hi,I have IPTV system deployed in the network, there are two options from the client side to join a channel "group" either using hardware "set box" or using software that the client can install in his PC.The problem is that in the soft method the cli...

anasmomo · 05-15-2009

Hello,I have two networks (net1 & net2) in one site (Site A) and two networks (net3 & net4) in another site (site B), I want to connect the two sites but by isolating the access so net1 can access net3, and net2 can access net4. Leased line of 300Mb...

anasmomo · 08-03-2009

Hellobecause i have single mode fiber already installed and the distance is less than 200Meter. and i will have SX SFPs.so i want to check if SX will operate with this SMF?Thanks

anasmomo · 08-03-2009

but why the LX work over both multimode and single mode with two different distances?

anasmomo · 05-20-2009

Thank you Dariusz, i think the ip igmp max-groups will work. the clients in our network can use VLC opensource and i will try to limit them from opening more than one channel in the same time.Thanks againAans

anasmomo · 05-15-2009

Hi Sam,i think if i configure BGP then the network will be as a full MPLS.i think without BGP, the routes from CE's in the two locations will be propagated using OSPF, because OSPF adjacency will be built as follow:CE(first site)---VRF (3750-1)---VRF...

anasmomo · 05-15-2009

Hi Sam,The provider will just provide layer 2 leased lines to the two location, i will provide the 3750 switches and configure the VRF-lite on it.so i think the 3750 will work as a PE's and the LAN switches 6509's will work as a CE's.i am thinking as...

Member Since	‎08-22-2006 05:40 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	43

User Statistics

User Activity

GLC-SX-MM

Multicast RP placement?

IPTV and IGMP

IPTV and IGMP

VRF lite and Catalyst 3750

Re: GLC-SX-MM

Re: GLC-SX-MM

Re: IPTV and IGMP

Re: VRF lite and Catalyst 3750

Re: VRF lite and Catalyst 3750