Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I have this scenario, AS5510 ver 8.4(3), VPN Client 5.0.07, RADIUS authentication with IAS on Windows 2003 Server.The issue is that, estabilishing the connection with the VPN Client, if the user credentials are correct every things works fine, ...
I have an ASA5505 and the software Version is 7.2(4). The problem is thet it stops passing traffic randomly, after a day or 1 hour or so on. I can reach the ASA trough the outside interface using SSH but the inside interface is isolated.The interface...
Hello.My default gateway is an ASA5505 and I need to route a network trought a router connected on the same interface of the source client.So the traffic have to enter and exit by the same interface, to do that I use the same-security-traffic permit ...
HiI have a 3750G-12S with SFP modules GLC-GE-100FX=.Interfaces work fine, but I noted an unusual overheating of SFP modules.I don't know the exact temperature, but to give you an idea, when I remove an SFP module from the slot I difficultly can take...
Is possibile on PIX 515 ver 6.3 to configure ACL with host names that are resolved by external DNS server. Is possibile on PIX 515 ver 6.3 configure ACL with host names that are revolved by external DNS server.Thanks
Hello,We have the same behavior with different hardware and software version.Our environment consist of:3 indipendent ASA 5508-XFirmware version 9.14.4.23Anyconnect 4.10.07073The error appeared suddenly on few users at the moment, without we did any ...
In my case I have VPN set up using VTI and not crypto map, so do I have to route OUTSIDE interface through the tunnel? In any way this is not optimal in situation where OUTSIDE interface has to be reached not throug vpn, for instance Anyconnect or re...
I had an ASA with SNMP polling from a remote site through VPN tunnel running for a long.After the ASA software upgrade to version 9.14.2 SNMP polling stopped working.It keeps to work fine from hosts residing on inside network.
