Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, we are trying to get visibility into traffic at our remote site using netflow on a 9500. This remote site core switch has many VLANs and attaches to many 9300 access switches via trunks. All routing for the site is on the 9500. Traffic from and t...
Hi, I've been doing my research, watching vids on MP-BGP EVPN. All the documentation I have found thus far is referring to the Spine/Leaf design and config. I'm looking to L2 connect DCs over L3 (using a 9k in one DC and CSR100v in the other DC) by r...
Hi, wanted to get some advice/opinions on Internet path when working with 2 routers. Currently, we have 2, ASRs connecting via BGP accepting a full BGP feed to one provider each. Also, we are running iBGP between the 2, ASRs and exchanging iBGP route...
Hi, I'm trying to automate backup configurations from our 5Ks. I understand the archive command is not supported on the 5K and we've used that successfully on our IOS gear. Below is my EEM script...can anyone see an issue with it? Curiously, the comm...
Hello, is it possible to automate configuration backups to an SCP server using the Archive command sourced from the Management VRF and Management interface? Trying to accomplish this using an ASR, 4948, and ASA, and Nexus 5K. So far I've been able to...
Thx BB - do you config ingress and egress on VLAN interfaces or just in one direction? And why? Also, if I configure only on VLAN interfaces I would miss intra-VLAN flows, correct? For L2 traffic within the VLAN I would need to configure netflow on t...
Thank you, Joseph for you thoughtful post. You've given me some inspiration for design changes when we go to replace our Internet routers soon. Thank you, Pat
Yea - actually forgot about the prompting for password...sort of a pain in the butt. Agreed, not a perfect solution, but I needed to move on as I couldn't get it to work totally automated within a reasonable amount of time. Since I only have 2 Nexuse...
Igoris, What I did in the end was create an alias for "wr" cli alias name wr copy running-config scp://user:[email protected]/NEXUS-SWITCH-Configs/NEXUS-SWITCH-Config-$(TIMESTAMP) vrf VRF_EXAMPLE This is not a scheduled task, but the next best thing....
Thanks, Mark. My script appears to be sending the copy scp command to the server, but I believe the server is asking for a password and my script is not sending it....so it hangs. When I run the copy running-config scp command manually I get a passw...
