Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I would like to implement QoS betwen two hops.On one side i have frame relay, and on the other side i have ATM.After trying to implement priority queueing i read somewhere that you cannot implement PQ on logical interfaces. So all my subinterf...
Hi All,I am trying to configure priority queuing on my ATM subinterfaces.I specify the priority queue to be an access list.i then create my access list and specify the traffic to be prioritised.I know i can configure it on serial int and fastethernet...
Hi all,I would like to configure this switch to give high priority and switch data from a given port first.In more detail i would like to deal with data (voice) that comes on a certain interface first, where the VoIP card of a PBX system is connecte...
Hi all,I have a little question for you.I have a FR 2 Mbits on my serial 1 (1721 router)When i do a show int serial 1 i get the following CAPOROUTER#show int serial 1Serial1 is up, line protocol is up Hardware is PowerQUICC Serial MTU 1500 bytes, ...
Hi All,I have just installed a tftp server on my machine for billing purposes for a PBX system.To my surprise i saw 2 routers trying to access this tftp server and request a configuration file.How can i disbale this tftp request on my routers ???Hope...
Hi Robert,I try to follow the link, but it asks that i must be registered with CCO . I thought that i am, as im posting on the forum. i guess it requires the same username and password or a different one than the one for the forum. anyways... i hope ...
Hi GP,The telephony system is a Siemens HiPath 3750.Two Siemens VoIP cards will be installed on the two telephony systems so that they can communicate their voice traffic as IP traffic.I have spoken to the technician who is to install the new system ...
Hi,Familiar problem. Eventually it was Microsoft Outlook "trying" to send an email. Had the same problem twice so far. Some clever person at work tried to send a 30 MB email to somebody in the office, and maximum mail message is 4 MBs :). Still i thi...
Thanks Sachin,My problem was th eproxy setting in the Browser (IE)I left it on, and just bypassed the switch address.Thanks for the help,I will be back with more questions.Thanks once more,George
Hi again,I hope i dont sound stupid, First of all, i can tell you that i am able to ping the switch and get the replies. We are both on the same subnet. My address: 10.51.12.31/24 and the switch is 10.51.12.11/24 .When you say CMS server you mean th...
