Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
what are you trying to power and what voltage and current do you need. If your device will work at 18VDC and 350 ma you can try the PD-AS-601/18 that is 802.3af compatible and was described in thw white papaer below asThe PowerDsine PD-AS-601/18 Acti...
Murtada,The Cisco 1200 AP is not 802.3af compliant and will not work with a pure 802.3af switches. You should be able to add a PDPS800 which will receive power from an 802.3af switch and output 48VDC plus data to the 1200.The PDPS800 will need to be ...
The PowerDsine PD-AS-601/18 Active Splitter (18 Volts) can be used with the Cisco Aironet AIR-PWRINJ-BLR2T (12 to 40 VDC) transportation power injector to power the Cisco Aironet 1300 series access point or bridge from a non-Cisco IEEE 802.3af power ...
The PowerDsine midspans supports both inline power and 802.3af. You can directly connect Cisco 7912G and 7905G phones because they are not polarity sensitive. In order to support the 7940s and 7960s with the Powerdsine midspan, you must add a Cisco d...