Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I have two Pix firewall which connect to Paradyne Modem. Plz take a look at the network diagram as below:FileServer>>>Pix1>>>>Modem...PhoneLine(ISP)...>>>Modem>>>>Pix2>>>>PCWhat I am trying to do is to let my PC to be able to ping to my file se...
Hello,I have a pix firewall which connects to core router. I also have one network(let say network 1) between the pix firewall and core router.What I am trying to do is to allow some hosts in Network 1 to access my network 2(File Server) which stay b...
Hello,I am going to install 2 Cat. 2950SX Switches for my internal system. What I am doing is to connect two different links between the 2 above Switches. Normally cisco cat. switches can support up to 4 or 5 links(I am not sure). When one link goes ...
Hello,I have a 1751 Router which connect to ISP1(Lease Line). For the Internet Connection, I have faced many problem with the connection, sometimes disconnect(not stable). So that's why I decided to connect to one more ISP( ISP2, SDSL). What am i goi...
Hello,I have 2 Cat.2950 Switches. What I am doing is to link these two swithes together(redundant link purposed). Plz take a look at the scenario as below: SW2_2950--->Core Switch--->Router | | | ...
Hello Vasthorvak,Thanks for your reply.I am sorry, I posted with the wrong network digram.The below is the correct one.If possible, could you plz advice me in detail, coz i am not so familiar with Pix Firewall, and I need to finish this implemenatati...
Hello Vasthorvak,Thanks for your reply.I have tried to configure the access-list and static(inside,outside) on the PIX for my Head and Branch Office.but I think I configured somewhere wrongly, meaning that I still cannot ping from my Head Office to D...
Hi Sunilc,Thanks for the reply.I got another problem with outside vpn users. I have a Watchguard Firewall which stays in front of Cisco Pix.And now what I am trying to do is to allow my outside vpn user access to my internal file server.Note: WatchG...
Hi Amit,Thanks for the reply.The solution you above mentioned is absolutely correct by configuring EtherChannels. But I heard CCIE guy said that no need to configure through EtherCannel, just only confuring through web interface and select the ports ...
Hi Ankur,Thanks for the reply.After reading the documentation, I am still not clear that let says I connect two different links between the two switches 2950sx, Does EtherChannel can increase the bandwidth(speed) to 200Mbps, coz one link is 10/100M...
