Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I use Cisco 1841 with WIC-1SHDSL-V3 and IOS c1841-ipbase-mz.124-15.T4.bin as CPE to connect via PPPoE to a BRAS. The connection between CPE and the BRAS is made via L2TP. Further I use a GRE tunnel to bridge layer 2 traffic between remote and c...
Hello,I'm looking for a way to redistribute a route to a device reachable via a dialer interface during the time the remote side is connected - mainly when the remote side has dialed in, the other case would be nice, but is not necessary.The underlyi...
HiI would like to find a way to overwrite a dynamic (eigrp) route with a routing entry pointing to a dialer interface, when someone has dialed into this dialer interface.Does someone of you knows a way how this can be done?Thanks in advance and kind ...
Hello,maybe someone of you can help me. I'm looking for a way to bridge traffic between two sides. The 'remote' side has to use pppoe to connect to the 'central' side. And at the central side I want to bind/bridge the remote side into a vlan. To figu...
Hi all,is it possible to let the RADIUS server decide which one of the 'interface virtual-template' configured on an router should be used? So that one can assign different virtual-templates to different users, when they dial in.In my case I have to ...
Hi,on a concentrator 3005 you can apply a filter to each user seperatly under "Configuration | User Management | Users " choose the "General" tab. So you can restrict a user to the 'places' you allow him to go to.Assuming you do tunnel everything not...
Hi,ESP is a protocol like tcp or icmp, it's protocol number is 50.I would put the pix into the dmz if possible. And if there is another free public, I would put the access-point next to the pix into the dmz. and let the access-point do the nat for th...
Hi,I've no experience with exactly this hardware constellation.But when it comes to ethernet speed and duplex settings, the one thing I can say is use the same setting on both sides, regardless if it is auto or a fixed setting. But check if the conne...
Hi Martin,thanks for your reply. No I haven't took a look at RADIUS route download, except the quick look right now.At the moment there is no RADIUS or other aaa server involved in the concerned scenario.regardsMark
