Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I have a problem that seems to be caused by the WIC-2T smart serial card. I have a Cisco 2811 router in which I have installed a smart serial WIC-2T card. This card is linked via Telco 512Kbps data circuit to a remote site. All configs seem to ...
Hello,I have a Cisco 1841 router and a HWIC-AP-AG-A card. I have tried installing the HWIC card in the 1841 router and I get an error stating that there is an unknown daughter card in the slot. I also tried the card in a 2821 router and I still get ...
Hello all,I have a Cisco 350 series bridge that is currently the Root for 4 other bridges. 2 of which are 350series and 2 which are 1200series.Within the past 2 weeks I added in the 2nd 1200 bridge on to this particular network. Over the past 2 days ...
Hello, I currently have set up a VPN Concentrator 3000 series. I use RADIUS to authenticate users and the concentrator acts as a DHCP server and issues IP's to users who connect to our network. Currently some users can connect and access all required...
Hello,I currently have set up a VPN Concentrator 3000 series. I use RADIUS to authenticate users and the concentrator acts as a DHCP server and issues IP's to users who connect to our network.Currently some users can connect and access all required r...
Please find the sho int for the serial interface below:RTR#sh int seri 0/0/0Serial0/0/0 is down, line protocol is down Hardware is GT96K Serial Description: WAN Link. Link speed is 512Kbps. Internet address is 10.240.0.1/16 MTU 1500 bytes, BW 15...
Hello ediortiz,Encapsulation is HDLC. Both ends do have the same encapsulation. The serial is connected to the Telco's CSU/DSU on both ends.When I turn on the debug serial interface for that particular interface it shows that the interface restarts i...
Thanks.Just another clarification please. 1. Does wireless work similar to half duplex? 2. If there is more than one client bridged to the root then is the bandwidth eg 11Mbps shared amongst along the bridged clients? eg. 2Mbps each on full duplex?Th...
