Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We have s 6506-E that needed to be powered down due to a maintenance.After it booted up, we noticed that the configuration "switchport mode trunk" disappeared from the configuration under one of the port channels (including its member interfaces) ...
Hi Guys,Try as I might, I cannot find any documentation explaining what is the meaning of "remote" in the output of show environment of 4500 chassis. Can someone please explain what is its meaning, and its difference with the normal one?Sample output...
Hi. I am trying to downgrade the IOS versions (03.08.04.E⇒03.06.02.E) of a 4500 VSS pair in the lab using the method here. I am getting into trouble when I reload the standby switch on step 9 ( redundancy reload peer) with the error message below:*Au...
After upgrading our 3850 switch to IOS 16.09.01, I cannot configure link debounce time on interface configuration mode on Te1/1/3 interface. Is this command not present in this IOS version anymore?Is there an alternative command? Thanksnew-WI-GATE-B...
We have 2 3850 switches in stack, and the flash memory as per the datasheet should be 2GB. HOwever, when running the show version in stack, not only do the flash memory of the 2 switches not reach 2GB, the overall memory capacity slightly differ as w...
I have done exactly that and still the same issue. The config registry for both switches is the same as well, 0x2. When I tore down the vsl by converting it to standalone, both switches reloaded and booted to thecorrect image I wanted, but only faili...
I have checked on the feature navigator and this command is supported on IOS 16.09.01. There seems to be no prerequisite command as well. I am at a loss on why the command is not supported and do not want to downgrade, especially if i do not know th...
HI Georg,IOS Version 16.08.01a.I cannot do a software clean now but below is the dir output of the 2 flash
#dir flash-1:Directory of flash:/
24242 -rw- 2097152 Jul 27 2018 15:35:53 +09:00 nvram_config24243 -rwx 74369716 Dec 15 2014 20:12:16 +09:00 ca...
