cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1478
Views
0
Helpful
4
Replies

"link debounce time 100" on IOS-16.09.01

ring_gt
Level 1
Level 1

After upgrading our 3850 switch to IOS 16.09.01, I cannot configure link debounce time on interface configuration mode on  Te1/1/3 interface. Is this command not present in this IOS version anymore?
Is there an alternative command? Thanks

new-WI-GATE-BSW01#show version
Cisco IOS XE Software, Version 16.09.01
Cisco IOS Software [Fuji], Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 16.9.1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Tue 17-Jul-18 16:06 by mcpre

new-WI-GATE-BSW01(config-if)#?
--More-- lacp LACP interface subcommands
link Interface link related commands
linksec-shim Configure link security parameters

new-WI-GATE-BSW01(config-if)#link ?
% Ambiguous command: "link "

4 Replies 4

ring_gt
Level 1
Level 1

Any help please? Thanks 

FilipHansen
Level 1
Level 1
Have u tried just typing in the whole command? Might be thats its there just hidden ?

Yes  I have tried it, no good.

ew-WI-GATE-BSW01(config)#int te 1/1/3
new-WI-GATE-BSW01(config-if)#
new-WI-GATE-BSW01(config-if)#link ?
% Ambiguous command: "link "
new-WI-GATE-BSW01(config-if)#link debounce ?
% Ambiguous command: "link debounce "
new-WI-GATE-BSW01(config-if)#link debounce time ?
% Ambiguous command: "link debounce time "

ring_gt
Level 1
Level 1

I have checked on the feature navigator and this command is supported on  IOS 16.09.01. 
There seems to be no prerequisite command as well. I am at a loss on why the command is not supported and do not want to downgrade, especially if i do not know the reason. 

Review Cisco Networking for a $25 gift card